BFTHL - C 111

  • MSDS: BFTHL
  • Manufacturer: STABOND CORP
  • Product Name: C 111
  • National Stock Number: 8040-00-869-8792
Product Identification

Product ID:C 111
MSDS Date:01/01/1987
FSC:8040
NIIN:00-869-8792
MSDS Number: BFTHL

Responsible Party
STABOND CORP
14010 S WESTERN AVE
GARDENA, CA 90249-3008
US

Cage: 25670

Contractor
STABOND CORPORATION
GARDENA, CA 90249-3008 US

Telephone: 213-770-0591/800-4249300

Cage: 25670

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 70%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:VAP MAY CAUSE IRRIT TO NOSE,THORAT.ABOVE TLV
IRRIT OF MUCOUS MEMB,UPSET STOMACH,DIZZ,VOMIT,HDCH.SUPP

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR.RESTORE BREATH,IF REQUIRED.KEEP
WARM.GET MED ATTN.EYE:WASH W/ LARGE AMOUNTS OF H*2O.IF IRRIT
PERSISTS,CALL MD.INGEST:IF CONSCIOUS,DRINK 3 GLASS OF WATER OR MILK
& INDUCE VOMI T.CALL MD.SKIN:WASH W/ SOAP,WATER.IF IRRIT,CALL MD

Fire Fighting

Flash Point:20F,-7C COC
Lower Limits:1.8
Extinguishing Media:FOAM,ALCOHOL FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:SCBA IS REQUIRED FOR FIRES IN ENCLOSED AREAS
Unusual Fire/Explosion Hazard:VOLATILE SOLVENT CONSTITUENT CAN READILY
FORM EXPLO OR FLAMM MIXT IN AIR.VAP CAN FLOW TO IGNIT SOURC

Accidental Release

Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID.REMOVE ALL
IGNITION SOURCES.SOAK UP WET MATERIAL ON A NON-COMBUSTIBLE
ABSORBENT AND PLACE IN A CLOSED METAL CONTAINER.

Handling

Handling and Storage Precautions:STORE IN COOL,WELL VENTILATED AREAS
AWAY FROM ANY IGNIT SOURCES AND STRONG OXIDIZING AGENTS.KEEP CONTNR
CLOSED,WHEN NOT IN USE.DO NOT USE CONTACT LENS
Other Precautions:DO NOT TRANSFER TO PLASTIC CONTNR.GROUND,BOND METAL
CONTNR WHEN DISPENSING.NO SMOKING IN AREAS OF USE OR STORAGE.USE
ONLY NON-SPARKING TOOLS NEAR WET ADHES OR SOLVENT VAP.WASH CONTAMIN
CLOTH.

Exposure Controls

Ventilation:MECHANICAL VENTILATION,LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFE GLASS W/ SIDE SHIELD
Other Protective Equipment:EYE WASH FOUNTAIN OR BOTTLES.SOLVENT INSO
BARRIER HAND CREAM
Supplemental Safety and Health
MSDS PREP:04AUG86.EFFECT OF OVEREXPO:HIGH CONCENTRN CAN CAUSE
UNCON.LIQUID CONTACT WILL DEFAT SKIN & MAY CAUSE DERMATITIS.EYE
CONTACT MAY CAUSE IRRIT AND BURNING SENSATION.SPEC:TYPE III

Chemical Properties

Boiling Pt:B.P. Text:176F,80C
Vapor Density:>1
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN COLOR,31-35% SOLID
Percent Volatiles by Volume:77.8

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZATION AGENTS CAN CAUSE SPONTANEOUS COMBUSTION
Stability Condition to Avoid:KEEP AWAY FROM ALL SOURCES OF IGNITION AND
HEAT.
Hazardous Decomposition Products:BURNING MAY PRODUCE NITROUS
OXIDE,PHENOLS,CO*2,HCN,CO

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ LOCAL,STATE AND FEDERAL
REGULATIONS FOR METHYL ETHYL KETONE.SOLID INGREDIENTS NOT
CONSIDERED HAZARDOUS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.